Atlas PK-414A 14,000 lbs 4 Post Alignment Lift


50 in stock

The Atlas® 414A is a 4 post alignment lift with 14,000 pounds of total lift capacity.

The Atlas® 414A incorporates many structural and cosmetic features that are found on lifts costing thousands of dollars more money. The 414A is tested to ensure that this lift system will perform flawlessly at its rated capacity. 

The Atlas® 414A uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift.

Many competitors use an “old style” chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to “level” properly and the exposed hydraulic cylinder is responsible for numerous “door dings”.

Besides having all the heavy duty features of the Atlas® 414, such as “tracks” between the runways to allow the use of a rolling bridge jack (the Atlas® RJ8000BK) on the lift (rolling jacks sold separately) the 414A features slip plates and alignment turntables.

The slip plates are built in and are assured to be level with the turntables. The turntables can be set in different positions on the runway to accommodate a wide variety of wheelbases. The 414A also features metal cover plates to replace the turntables when not in use and so the lift can be used for more than just alignments.

Features & Benefits

  • 14,000 lb. Capacity
  • Heavy Duty, Commercial Grade
  • Extra Tall, Extra Wide & Extra Long
  • Built-In Slip Plates & Alignment Turntables Included
  • Multiple Positions for Turntable Placement
  • Runway Covers Included (when Turntables are Removed)
  • Air Operated Single Point Lock Release (External Air Supply Required)
  • Lock Ladder Design
  • Double Lock Safety System
  • Powder Coat Finish
  • Steel Approach Ramps Included
  • Additional Drive off Ramps Available (Sold Separately)
  • Runway Extensions Available (Sold Separately)
  • Mounting Hardware Included
  • 220volt/1phase Electric Operation (Requires a 30amp Breaker)
  • 5 yr Structural – 2 yr Hydraulic Warranty – Parts Only

Atlas® ATPK-414A Specifications

Capacity 14,000 lb.
Lifting Height 75″ (6′ 1 1/2″)
Overall Width Of Columns (Without Motor) 130 7/8″ (10′ 10 7/8″)
Overall Width Of Columns (With Motor) 138 7/8″ (11′ 6 7/8″)
Overall Length With Approach Ramp 257 1/2″ (21′ 5 1/2″)
Length Between Columns 196 3/4″ (16′ 4 3/4″)
Runway Length 207″ (17′ 3″)
Runway Width 20″
Thickness Of Runway 7″
Width Between Runways 47″ (w/ Rail 43 1/2″)
Outside Runway To Outside Runway 87″ (7′ 3″)
Clearance Under Runways 67 7/8″ (5′ 7 7/8″)
Clearance Between Columns 116″ (9′ 8″)
Height Of Columns 86″ (7′ 2″)
Maximum Wheel Base 197″ (16′ 5″)
Drive Thru 102 1/8″ (8′ 6 1/8″)
Motor/Electrical Requirement 220 volt single (1) phase.

A 30 amp breaker is recommended

Oil Requirement 3-5 Gallons



Requires a minimum of 6″ of concrete with a 3000 psi. rating

At Dmsofts, we are dedicated to providing our customers with the best service possible.

We offer free shipping and 1 to 2 days handling on all orders.

We strive to process all orders within 2-4 business days.

Our transit time is 5-7 business days.

We are not responsible for any delays due to weather, natural disasters, holidays, or any other circumstances beyond our control. If you have any questions about our shipping policy, please contact us at