Atlas Garage PRO7000ST 7,000 lbs Super Tall 4 Post Lift

$957.00

50 in stock

The Atlas® Garage PRO7000ST is the perfect lift for those car enthusiasts lucky enough to have extra tall ceilings and need to store regular height vehicles on top of extra tall vehicles. The PRO7000ST raises vehicles weighing up to 7,000 lbs. all the way to over 12 feet (144 inches) under the runway. 

This super tall four post storage lift uses the same heavy duty runways as the Atlas® Garage PRO9000. The runways feature welded tracks which allow the use of a rolling bridge jack (such as the Atlas® RJ6BK).

The extra tall lifting height gives customers the space needed to park much taller vehicles under the vehicle stored on top. There are a whopping 21 locking positions in the lock ladder, and the lock ladder may be adjusted during installation giving an almost infinite number of locking heights.

A single point release toggle (located next to the power unit) automatically unlocks all four spring loaded pneumatic locks. Compressed air is required to disengage the locks (air supply not included). The emergency slack cable secondary lock system is always “on standby” and will engage automatically if the cables are compromised or become too slack.

 

Features & Benefits

  • 7,000 lb. Capacity
  • Heavy Duty
  • “Super Tall” Lifting Height
  • Extra Wide & Extra Long
  • Diamond Plated Runways
  • Single Point Release, Pneumatic Locks (External Air Supply Required)
  • Lock Ladder Design
  • Double Lock Safety System
  • Steel Approach Ramps Included
  • Mounting Hardware Included
  • Perfect for Storage or Working on Vehicles
  • 220volt/1phase Electric Operation (Requires 30amp Breaker)
  • 2 yr Structural – 1 yr Hydraulic Warranty – Parts Only

 

Atlas® Garage PRO7000ST Specifications

Capacity 7,000 lb.

Lifting HeightTo Top Of Runway

147″ (12′ 3″)

Clearance Under Runways

142″ (11′ 10″)
Height of Columns 162″ (13′ 6″)

Overall Width(Without Motor)

110 1/2″ (9′ 2 1/2″)
Overall Width (With Motor) 123″ (10′ 3″)
Overall Length with Approach Ramp 227 1/2″ (18’ 11 1/2”)
Approach Ramp 31″ (2′ 7″)
Runway Width 21″ (w/ Rails) or 20″ (Driving Surface)
Runway Length 194″ (16′ 2″)
Runway Thickness 4 3/4″
Width Between Runways 45″ (3′ 9″)
Width Between Runway Rails 41 3/4″ (3′ 5 3/4″)
Outside Runway To Outside Runway 83″ (6′ 11″)
Clearance Between Columns 100″ (8′ 4″)
Length Between Columns 185″ (15′ 5″)
Maximum Wheel Base

182″ (15′ 2″)

Drive Thru (Outside Of Tire To Outside Of Tire)

82 1/2″ (6′ 10 1/2″)

Motor/Electrical Requirement

220 Volt, 1 phase, 30 AMP BREAKER REQUIRED


Locking Positions Under Runway(+/ 2″)

  • 23″ (1′ 11″)
  • 29″ (2′ 5″)
  • 35″ (2′ 11″)
  • 41″ (3′ 5″)
  • 47″ (3′ 11″)
  • 52″ (4′ 4″)
  • 58″ (4′ 10″)
  • 64″ (5′ 4″)
  • 70″ (5′ 10″)
  • 76″ (6′ 4″)
  • 82″ (6′ 10″)
  • 88″ (7′ 4″)
  • 94″ (7′ 10″)
  • 100″ (8′ 4″)
  • 106″ (8′ 10″)
  • 112″ (9′ 4″)
  • 118″ (9′ 10″)
  • 124″ (10′ 4″)
  • 130″ (10′ 10″)
  • 136″ (11′ 4″)
  • 142″ (11′ 10″)

At Dmsofts, we are dedicated to providing our customers with the best service possible.

We offer free shipping and 1 to 2 days handling on all orders.

We strive to process all orders within 2-4 business days.

Our transit time is 5-7 business days.

We are not responsible for any delays due to weather, natural disasters, holidays, or any other circumstances beyond our control. If you have any questions about our shipping policy, please contact us at support@dmsofts.co.uk